Bifurcation analysis of visual angle model with anticipated time and stabilizing driving behavior

In the light of the visual angle model (VAM), an improved car-following model considering driver's visual angle, anticipated time and stabilizing driving behavior is proposed so as to investigate how the driver's behavior factors affect the stability of the traffic flow. Based on the model, linear stability analysis is performed together with bifurcation analysis, whose corresponding stability condition is highly fit to the results of the linear analysis. Furthermore, the time-dependent Ginzburg-Landau (TDGL) equation and the modified Korteweg-de Vries (mKdV) equation are derived by nonlinear analysis, and we obtain the relationship of the two equations through the comparison. Finally, parameter calibration and numerical simulation are conducted to verify the validity of the theoretical analysis, whose results are highly consistent with the theoretical analysis.     

In vivo comprehensive multiphase NMR

Traditionally, due to different hardware requirements, nuclear magnetic resonance (NMR) has developed as two separate fields: one dealing with solids, and one with solutions. Comprehensive multiphase (CMP) NMR combines all electronics and hardware (magic angle spinning [MAS], gradients, high power Radio Frequency (RF) handling, lock, susceptibility matching) into a universal probe that permits a comprehensive study of all phases (i.e., liquid, gel-like, semisolid, and solid), in intact samples. When applied in vivo, it provides unique insight into the wide array of bonds in a living system from the most mobile liquids (blood, fluids) through gels (muscle, tissues) to the most rigid (exoskeleton, shell). In this tutorial, the practical aspects of in vivo CMP NMR are discussed including: handling the organisms, rotor preparation, sample spinning, water suppression, editing experiments, and finishes with a brief look at the potential of other heteronuclei (²H, ¹⁵N, ¹⁹F, ³¹P) for in vivo research. The tutorial is aimed as a general resource for researchers interested in developing and applying MAS-based approaches to living organisms. Although the focus here is CMP NMR, many of the approaches can be adapted (or directly applied) using conventional high-resolution magic angle spinning, and in some cases, even standard solid-state NMR probes.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

基于横向莫尔条纹的自准直测角方法

本文提出了基于横向莫尔条纹的自准直测角方法,用遮光原理分析了莫尔条纹的位移放大作用.并基于该方法搭建了原理光路,得到的莫尔条纹信号稳定且能够满足测量需求.在此基础上对系统进行了定量标定,简化了数据处理步骤,实现了动态测量,系统分辨率达到10″,进一步明确将该方法应用到自准直仪中可以有效提高仪器分辨率.     

C^n中子空间之间极端主角的一些应用

本文给出了Ｃ＾ｎ中子空间之间最大和最小主角在矩阵逼近，投影算子的扰动分析，群逆以及Ｏｒａｘｉｎ逆的扰动估计，条件数理论，Ｂｏｔｔ－Ｄｕｆｆｉｎ系统扰动分析中一些应用。     

Geometric visualization of the Brewster angle from dielectric-magnetic interface

A geometric visualization is presented for the Brewster angle for a plane wave reflecting from an interface. The surface is assumed to be isotropic but it is allowed to display both dielectric and magnetic susceptibility, and hence the Brewster (polarizing) angle can attain any value between 0 and 90^°, and can exist for both parallel and perpendicular polarizations. The geometric construction (a tetrahedron) is spanned by the basic material parameters of the surface. The Brewster angle appears in one of the faces of the tetrahedron.     

双向分束角对称的偏光分束镜设计与性能分析

为了获得分束角对称的偏光分束棱镜，在双Wollaston棱镜结构的基础上，通过合理设计棱镜左右两端晶体光轴的取向，使棱镜整体呈中心切面对称；在保证对正向入射的光对称分束的同时，对反向入射光同样可以对称分束，达到了双向对称分束的目的；在此基础上给出了晶体光轴的旋转角δ与棱镜结构角S以及与波长的关系；并分析了对633 nm设计的棱镜用于其他波长时分束角的对称性.结果表明：在±300 nm的光谱范围内，分束角的不对称度均小于0.24°.